Allied Telesis AT-8126XL - Manual (Page 60)

Index
Index-ii
M
management
local, Omega, 2-10
network features, 1-4
out-of-bandwith, 1-7
management information base (MIB), 1-4
media dependent adapters (MDAs), see
AT-A10, AT-A11, AT-A20, and AT-A21
memory, packet buffer size, 1-3
mode
cut-through, fragment free (for 100
Mbps ports only), 1-5
store-and-forward, 1-5
models AT-8118, AT-8124XL and
AT-8126XL, 1-2
N
network management features, 1-4
O
Omega, 1-4, 3-1
local management, 2-10
out-of-band management, 1-7
P
package contents
MDA, 2-7
switch, 2-1
packet buffer memory size, 1-3
port
description, 1-3
disabled, 3-5
uplink LEDs, 2-9
port speed (100 M) LED, 2-4
port speed, 100 M LED, 3-4
power failure, 3-6
power LED, 2-4, 3-4, 3-6
preparation, site installation, 2-3
problems, troubleshooting, 3-1
protocol
spanning tree protocol, 1-4
publications, list of, Preface-iii
R
rack installation, 2-5
receive (/link) LED, 2-4
redundant backbone connections, 1-4
remote connection, Telnet, 3-6
reset button, 3-1, 3-6
resetting through software, 3-6
RS232 connector, 1-7, 2-10
S
safety information, A-1
safety precautions, 2-2
settings
terminal, 2-10
shared memory architecture, 1-3
site preparation, 2-3
SNMP Management Information Base, 1-4
SNMP traps from switch, TCP/IP, 3-4
software
resetting the switch, 3-6
software downloads
failure indication, 3-6
Spanning Tree Protocol, 1-4
specifications, technical, B-1
standalone switch 4-1
standoff, AT-A10, AT-A11, AT-A20, and
AT-A21 2-7
store-and-forward mode, 1-5
switch
connecting devices, 2-11
desktop installation, 2-4
package contents, 2-1
T
TCP/IP
environment, 2-10
SNMP traps from switch, 3-4
TCP/IP, 3-4
technical support, contacting, 3-3
Telnet, remote connection via, 3-6
terminal settings, 2-10
troubleshooting
power LED off 3-6
problems, 3-1
U
uplink port (A or B) LED, 2-9
W
worst case path delay value, 3-2