Allied Telesis AT-8126XL - Manual (Page 24)

Installation
2-2
Safety Information
Refer to Appendix A for translated safety statements in your
language.
Warning
Electric Shock Hazard
To prevent ELECTRIC shock, do not remove cover. No user-service-
able parts inside. This unit contains HAZARDOUS VOLTAGES and
should only be opened by a trained and qualified technician. To
avoid the possibility of ELECTRIC SHOCK disconnect electric power
to the product before connecting or disconnecting the LAN cables.
! 8
Laser
Warning Class 1 Laser product.
! 6
Laser
Warning Do not stare into the Laser beam.
! 7
Caution
Lightning Danger
DO NOT WORK on equipment or CABLES during periods of
LIGHTNING ACTIVITY.
! 9
Caution
Electrical—Type Class 1 Equipment
This Equipment Must Be Earthed. Power plug must be connected
to a properly wired earth ground socket outlet. An improperly
wired socket outlet could place hazardous voltages on accessible
metal parts.
! 11
Caution
Electrical—Cord Notice
Use power cord, maximum 4.5 meters long, rated 5 amp minimum,
250V, made of HAR cordage molded IEC 320 connector on one end
and on the other end a plug approved by the country of end use.
! 12
Caution
Air vents must not be blocked and must have free access to the
room ambient air for cooling.
! 13
Caution
Operating Temperature
This product is designed for a maximum ambient temperature of
40° C.
! 14
Caution
All Countries: Install product in accordance with local and National
Electrical Codes.
! 15