Appendix c, Switch default settings – Allied Telesis AT-8126XL User Manual
Page 57
C-1
Appendix C
Switch Default Settings
This appendix lists the switch’s default software settings as
configured by the factory.
Table C-1 Switch Default Settings
Settings
Default
IP Address
0.0.0.0
Subnet Mask
0.0.0.0
Gateway Address
0.0.0.0
Get community string
Public
Set community string
Private
Trap community string
Public
Spanning Tree Protocol
Disabled
Telnet Access
Enabled
System Name
None
Password (Omega)
No password assigned
Download Password
ATS21
Duplex mode
Auto-negotiating
High Port Speed
Auto-negotiating
Active Aging Time (MAC address table)
300 seconds
Forwarding Mode
Store and forward
Domain Name
None
Virtual LAN
Default VLAN (all ports)