Allied Telesis AT-S63 - Manual (Page 286)

Chapter 13: Classifiers
286 Section II: Advanced Operations
7. Repeat steps 5 and 6 to adjust any other variables necessary to define
the traffic flow for this classifier.
8. After configuring the necessary variables, type C to select Create
Classifier.
The switch creates the classifier. If any of the settings are
incompatible, the system displays an error message. Refer to the
variable definitions in “Classifier Criteria” on page 277 for assistance in
resolving compatibility issues.
9. To create more classifiers, repeat this procedure starting with step 3.
10. To permanently save your change, return to the Main Menu and type S
to select Save Configuration Changes.
11. To add classifiers to an ACL, refer to “Creating an ACL” on page 303.
To add classifiers to a QoS policy, refer to “Managing Flow Groups” on
page 343.