Allied Telesis AT-S63 - Manual (Page 453)

AT-S63 Stack Command Line User’s Guide
Section VIII: Port Security 453
SHOW AUTHENTICATION
Syntax
show authentication[=radius]
Parameters
None.
Description
This command displays the following information about the RADIUS
authentication protocol on the stack:
ˆ Status - The status of your authenticated protocol: enabled or disabled.
ˆ Authentication Method - The authentication protocol activated on your
stack.
ˆ The IP addresses of up to three authentication servers.
ˆ The server encryption keys, if defined.
ˆ TAC global secret - The global encryption code that applies to all
authentication servers.
ˆ Timeout - The length of the time, in seconds, before the stack assumes
the server will not respond.
Entering the command without specifying RADIUS displays the current
status of the authentication feature and the specifics of the currently
selected authentication protocol. Specifying RADIUS in the command
displays the specifics for that authentication protocol.
Example
The following command displays authentication protocol information on
your stack:
show authentication
The following command displays the information for the RADIUS protocol:
show authentication=radius