Allied Telesis AT-S63 - Manual (Page 28)

Chapter 1: Overview
28 Section I: Basic Operations
Supported Features
A stack supports these features of the AT-S63 Management Software:
ˆ Local Management
ˆ Remote Telnet management
ˆ Remote web browser management
ˆ SNMPv1, v2c, and v3
ˆ Basic port configuration
– Port status (enabled or disabled)
– Auto-Negotiation
– Speed
– Duplex-mode
– Flow control and backpressure
– MDI or MDI-X setting
– Packet filtering and rate limiting
ˆ Port statistics
ˆ Static port trunks
ˆ Link Aggregation Control Protocol (LACP) trunks
ˆ Port mirroring
ˆ Event log
ˆ Syslog client
ˆ Class of Service
ˆ Internet Group Management Protocol (IGMP) snooping
ˆ Spanning tree protocol (STP)
ˆ Rapid spanning tree protocol (RSTP)
ˆ Port-based and tagged VLANs
ˆ Internet Protocol Version 4 packet routing with static routes (Does not
support the Routing Information Protocol.)
ˆ Basic 802.1x port-based network access control using the RADIUS
authentication protocol
ˆ Additional manager accounts using the RADIUS or TACACS+
authentication protocol
All of the other features in the AT-S63 Management Software are
automatically deactivated when a stack is powered on.