Allied Telesis AT-S63 - Manual (Page 410)

Chapter 22: Internet Protocol Version 4 Packet Routing Commands
410 Section VII: Internet Protocol Routing
SHOW IP COUNTER
Syntax
show ip counter [port= ports |all]
Parameters
port Specifies the ports whose IP statistics you want to
view. Omitting this parameter displays the statistics
for all the ports. Port numbers are entered in the
following format:
module ID.port number
For instructions, refer to “Port Numbers in
Commands” on page 42.
Description
This command displays Layer 3 counters for the individual ports on a
stack. Figure 42 is an example of the information displayed by this
command.
Figure 42. SHOW IP COUNTER Command
The lines in the display are:
ˆ IPInUcastPkts - Number of IP packets received on a port.
ˆ IPOutUcastPkts - Number of IP packets transmitted from a port.
ˆ IPInDiscards - Number of IP packets received but discarded due to
resource limitations at the IP level.
ˆ IPInHdrErrors - Number of IP packets received with header errors.
Port 1
IPInUcastPkts ................... 0
IPOutUcastPkts .................. 0
IPInDiscards .................... 0
IPInHdrErrors ................... 0
Port 2
IPInUcastPkts ................... 0
IPOutUcastPkts .................. 0
IPInDiscards .................... 0
IPInHdrErrors ................... 0