Allied Telesis AT-S63 - Manual (Page 300)

Chapter 18: SNMPv3 Commands
300 Section IV: SNMPv3
CREATE SNMPV3 VIEW
Syntax
create snmpv3 view= view [subtree=OID|text] mask= mask
[type=included|excluded]
[storagetype=volatile|nonvolatile]
Parameters
view Specifies the name of the view, up to 32
alphanumeric characters.
subtree Specifies the view of the MIB Tree. The options are:
OID A numeric value in hexadecimal
format.
text Text name of the view.
mask Specifies the subtree mask, in hexadecimal format.
type Specifies the view type. This is an optional
parameter. The options are:
included Permits a user to view the specified
subtree. This is the default.
excluded Does not permit a user to view the
specified subtree.
storagetype Specifies the storage type of this table entry. This is
an optional parameter. The options are:
volatile Does not allow you to save the table
entry to the configuration file on the
master switch. This is the default.
nonvolatile Allows you to save the table entry to
the configuration file on the master
switch.
Description
This command creates an SNMPv3 View Table entry.
Examples
The following command creates an SNMPv3 View Table entry called
“internet1” with a subtree value of the Internet MIBs and a view type of