Allied Telesis AT-GS950/8POE - Manual (Page 49)

AT-GS950/8POE Gigabit Ethernet WebSmart Switch Installation Guide
49
Connecting an RJ-45 Cable
There are eight RJ-45 ports on the AT-GS950/8POE switch. Ports 1
through 4 are PoE ports
To connect an RJ-45 cable to the switch, perform the following procedure:
1. Connect an RJ-45 cable to a twisted-pair port. See Figure 13.
Figure 13. Connecting an RJ-45 cable
An RJ-45 cable should fit snugly into the port on the switch. The tab on
the connector should lock the connector into place.
1346
ombo W
ebSmar
t Switch
8
1
2
3
4
POE
ORT A
CTIVITY
ACT
1000 L INK
100 LIN K
ACT
ACT
SFP