Allied Telesis AT-GS950/8POE - Manual (Page 43)

AT-GS950/8POE Gigabit Ethernet WebSmart Switch Installation Guide
43
Resetting the Switch
You may need to reset the switch after upgrading the firmware or after you
have made a configuration change that requires resetting the switch to
activate the change.
To reset the AT-GS950/8POE switch, perform the following procedure:
1. Locate the RESET button which is on the right hand side of the
faceplate.
2. Press the RESET button with the tip of a pen or a similar
nonconducting object as shown in Figure 12.
Figure 12. Resetting the Switch
1342
AT-GS950/8POE
8 Port 10/100/1000Mbps + 2 SFP Combo
Web
1 2 3 4
5 6 7R
7 8
8R
POWER
RESET
POR T ACTIV
ACT
10
10