Allied Telesis AT-GS950/8POE - Manual (Page 27)

AT-GS950/8POE Gigabit Ethernet WebSmart Switch Installation Guide
27
10/100/1000Base-
T Twisted Pair
Port LEDs
A twisted pair port has two LEDs labeled SPD (speed) and L/A (link/
activity). The SPD LED indicates the port speed. The L/A LED indicates
the activity on a port. Both of these LEDs apply to ports 1 through 6 and
7R through 8R.
Table 4 describes the LEDs for the 10/100/1000Base-T twisted pair ports.
SFP LEDs
Both SFP transceiver slots on the AT-GS950/8POE switch have one L/A
(link/activity) LED which applies to ports 7 and 8. See Table 5 for a
description.
Table 4. Twisted Pair Port LEDs
LED Function State Description
SPD Link Status
and Activity Off The port has established a link at
10/100Mbps or no link has been
established.
Green The port has established a link at
1000 Mbps.
L/A Off No link has been established.
Green The port has established a link.
Flashing
green Packets are being received or
transmitted.
Table 5. SFP Slot LED
LED Function State Description
L/A Link Status
and Activity Off No link has been established.
Green The port has established a link at
1000 Mbps.
Flashing
green Packets are being received or
transmitted at 1000 Mbps.
Amber The port has established a link at 100
Mbps.
Flashing
amber Packets are being received or
transmitted at 100 Mbps.