Allied Telesis AlliedView-EMS 4.0.1 VLAN MANAGER - Manual (Page 27)

Import VLAN dialog
Note - SNMPv3: When an excluded VLAN record is included in the list of VLANs to import,
the excluded VLAN record is deleted from the original VLAN configuration even if the
Import VLAN operation does not succeed. This applies to the AT-9400 and AT-8500 series
of devices.
5.2.5.1 File Field and Browse Button
You may specify a VLAN Configuration File (full path) in the File field. Alternatively, you can
use the Browse button to locate the VLAN Configuration File to use. Once a valid VLAN
Configuration File has been specified, the VLAN Definitions Table will be populated with the
VLAN definitions contained in the file. You may then manually edit the definitions within the
table.
Note - Be sure to specify a VLAN Configuration File that contains VLAN entries suitable
for the currently opened device. Otherwise, the Import VLAN function will fail. Refer to
Section 4.3 - VLAN Configuration Files for more details.
5.2.5.2 Add Button
Clicking the Add Button adds an empty row to the VLAN Definitions Table. Once a row
is added, it can be used to define a new VLAN.
5.2.5.3 Delete Button
Clicking on the Delete Button removes the selected row(s) from the VLAN Definitions Table.
AlliedView™-EMS 4.0.1 VLAN MANAGER USER’S GUIDE Page 27 of 72