Allied Telesis AlliedView-EMS 4.0.1 VLAN MANAGER - Manual (Page 20)

SHA
Use HMAC-SHA-96 protocol
Authentication Password
If the Security Level is "Auth / No Priv" or " Auth / Priv", you need to specify an
Authentication Password that is configured for the User Account Name on the
target device.
Privacy Protocol
If the Security Level is "Auth / Priv", you need to specify a Privacy Protocol.
This is the available Privacy Protocol:
DES
Use Data Encryption Standard
Privacy Password
If the Security Level is "Auth / Priv", you need to specify a Privacy Password that
is configured for the User Account Name on the target device.
Login
User Name
This is the account name to be used to log in to the device. By default, this field
is set to manager. This field is used for non-L2 devices only. For L2 devices, this field
is ignored.
Password
This is the password for the account to be used. This field is used for non-L2 devices
only. For L2 devices, this field is ignored.
Retry
Timeout
The number of seconds VLAN Manager waits before it determines that the device
is not responding. By default, this value is set to 5 seconds.
Count
The number of times VLAN Manager sends SNMP messages to the agent before
giving up. By default, this value is set to 2 retries.
5.1.2 Close
This option closes the active connection with the device and empties the VLAN Information
Window.
Note - This option is not available if VLAN Manager is not yet connected to a device.
AlliedView™-EMS 4.0.1 VLAN MANAGER USER’S GUIDE Page 20 of 72