Updating the rss queues property – Allied Telesis AT-2912T User Manual
Page 73
Secure Ethernet Network Adapters Installation and User’s Guide
73
Updating the RSS
Queues Property
The number of RSS queues varies depending on the adapter. For 1 Gbps
network adapters, the RSS queue options are 1, 2, 4, and 8. The default is
8 RSS queues. For 10 Gbps network adapters, the RSS queue options are
Auto, 1, 2, 4, 8, and 16. The default value is Auto queues.
To set the number of RSS Queues property, do the following:
1. Access the Advanced tab:
For Windows Server 2003 Operating systems, see “Selecting the
Advanced Tab in Windows Server 2003 or Windows XP” on
page 58.
For Windows 7 Operating systems, see “Selecting the Advanced
Tab in Windows 7” on page 61.
For Windows Vista Operating systems, see “Selecting the
Advanced Tab in Windows Vista” on page 63.
The Advanced tab is shown in Figure 30 on page 60.
2. From the Property list on the Advanced tab, select Number of RSS
Queues.
3. From the Value list on the Advanced tab, select one of the following:
1, 2, 4, or 8 (for 1 Gbps adapters)
Auto, 1, 2, 4, 8, or 16 (for 10 Gbps adapters)
4. Click OK.
5. If prompted to restart your computer, click Yes.
Although it is not necessary to reboot the system for new adapter
properties to take effect, rebooting is recommended to reinitialize all
registers.
6. Verify that the port LED operates correctly. See one of the following
descriptions:
“AT-2712FX/SC and AT-2712LX20/SC Adapters Physical
Descriptions” on page 17