Allied Telesis AT-2912T - Manual (Page 55)

Secure Ethernet Network Adapter Installation and User’s Guide
55
7. From the Start Menu, select Run.
The Windows Vista Run window is displayed. See Figure 23 on page
50.
8. Enter the following command in the Run window:
mmc devmgmt.msc
The Device Manager Window is shown in Figure 24 on page 51.
9. In the Device Manager window, click the + next to the Network
adapters folder.
The selection expands to show the list of installed network adapter
cards.
10. Right click on one of the following adapters:
 Allied Telesis AT-2712FX/SC
 Allied Telesis AT-2912T
Note
Select “AT-2712FX/SC” to remove the software drivers on either the
AT-2712FX/SC adapter or the AT-2712LX20/SC adapter.
The adapter window is displayed.
11. Select Uninstall.
A Confirm Device Removal window opens.
12. Click OK to complete the uninstall.
Note
Not all of the driver files are removed as a result of this procedure.
You can remove additional drivers and installation files by selecting
the checkbox to remove these files.