Allied Telesis AT-2912T - Manual (Page 68)

Chapter 5: Setting Advanced Properties
68
Updating the
Interrupt
Moderation
Property
Interrupt moderation enables adaptive interrupt coalescing, which limits
the rate of interrupt to the CPU during packet transmission and packet
reception. The disabled option allows one interrupt for every packet
transmission and packet reception. The default value is Enabled.
To change the Interrupt Moderation setting, do the following:
1. Access the Advanced tab:
 For Windows Server 2003 Operating systems, see “Selecting the
Advanced Tab in Windows Server 2003 or Windows XP” on
page 58.
 For Windows 7 Operating systems, see “Selecting the Advanced
Tab in Windows 7” on page 61.
 For Windows Vista Operating systems, see “Selecting the
Advanced Tab in Windows Vista” on page 63.
The Advanced tab is shown in Figure 30 on page 60.
2. From the Property list on the Advanced tab, select Interrupt
Moderation.
For an example of the Advanced tab, see Figure 30 on page 60.
3. From the Value list on the Advanced tab, select one of the following:
 Enabled
 Disabled
4. Click OK.
5. If prompted to restart your computer, click Yes.
Although it is not necessary to reboot the system for new adapter
properties to take effect, Allied Telesis recommends rebooting to
reinitialize all of the registers.
6. Verify that the port LED operates correctly. See one of the following
descriptions:
 “AT-2712FX/SC and AT-2712LX20/SC Adapters Physical
Descriptions” on page 17
 “AT-2912T Adapter Physical Description” on page 18