Avaya 5610 - Manual (Page 25)

4610/5610 Phone Page 25
15-601124 Issue 05a (16 July 2009) IP Office
Using Speed Dials: Overview of Speed Dials
3.2 Dialling a Speed Dial Number
You can use the speed dial directory to make a call with the handset on hook or off hook.
To dial a speed dial number:
1. To display the speed dial directory, press SpDial.
2. The symbol is shown if there is more than one page of speed dials. To move between pages, press and .
3. When the speed dial required is shown on the screen, press or adjacent to the speed dial name.
3.3 Adding a Speed Dial from the Call Log
You can create a new speed dial from a call log entry. See Saving a Call Log Entry to Your Speed Dial List . This
process will start the normal speed entry screen but pre-filled with the name and number from the call log entry.
3.4 Editing a Speed Dial
To edit a speed dial:
1. Press SpDial and then press Edit.
2. Select the speed dial entry you want to edit. To display different pages of speed dials, press and .
3. When the required entry is displayed, press the adjacent or .
4. Edit the speed dial using the same methods as for adding a new speed dial. See Adding a New Speed Dial .
5. To return to the speed dial list, press Save.
3.5 Deleting a Speed Dial
To delete a speed dial:
1. Press SpDial and then press Delete.
2. Select the speed dial entry you want to delete. To display different pages of speed dials, press and .
3. Press Delete again or to exit without deleting, press Cancel.
4. Select another entry to delete or to return to the speed dial list, press PHONE/EXIT.
32
26