Samsung SC-MX10A-XAP - Manual (Page 85)

English _73
CONNECTING THE USB CABLE
Connect the USB cable to copy movie images from the camcorder
to the PC and vice versa.
You can use various other functions with USB connection.
(as a PC-camera, data storage, etc.)
1. Set the
" USB Connect " to " Mass Storage. " ➥page 68
2. Connect the memory camcorder to the PC with a USB cable.
Disconnecting the USB cable
Before loading or unloading recording mediums or turning off the PC, fi rst disconnect the USB cable and turn off the
memory camcorder.
After completing the data transmission, you must disconnect the cable in the following way:
1. Click the
" Unplug or eject hardware " icon on the task tray.
2. Select " USB Mass Storage Device " or " USB Disk, " and then click " Stop. "
3. Click " OK. "
4. Disconnect the USB cable from the memory camcorder and PC.
If you disconnect the USB cable from the PC or the memory camcorder while transferring,
the data transmission will stop and the data may be damaged.
If you connect the USB cable to a PC via a USB HUB or simultaneously connect the USB cable
along with other USB devices, the memory camcorder may not work properly. If this occurs, remove all USB
devices from the PC and reconnect the memory camcorder.
•
•
PC
USB cable
Memory camcorder
Don’t apply excessive force when inserting or extracting a USB cable into/from a USB jack.
We recommended using the camcorder's AC adapter as the power supply instead of the battery pack.
When the USB cable is connected, turning the camcorder on or off the camcorder may cause the PC to
malfunction.
•
•
•