Samsung SC-MX10A-XAP - Manual (Page 30)

18_English
preparation
Charging the Battery Pack
The IA-BP85ST battery pack provided with this memory camcorder may be
charged a little at purchase time: Charge it fully before using the memory camcorder.
• Use IA-BP85ST battery pack only.
1. Slide the POWER switch downward to turn off the power.
2. Insert the battery pack.
3. Open the LCD screen and jack cover.
4. Connect the AC power adapter to the DC IN jack of your
memory camcorder.
5. Connect the AC power adapter to a wall socket.
The charging indicator will start to blink, showing that the battery pack is
charging.
6. When the battery pack is fully charged, disconnect the AC power adapter
from the memory camcorder.
•
Do not use the AC adaptor placed in a narrow space, such as between a
wall and furniture.
Before detaching the power source, make sure that the camcorder’s
power is turned off. Failure to do so can result in camcorder malfunction.
Use a nearby wall outlet when using the AC power adaptor. Disconnect
the AC power adaptor from the wall outlet immediately if any malfunction
occurs while using your camcorder.
•
•
•
CAUTION
Even if your camcorder is turned off, AC power (house current) is still
supplied to it while connected to the wall outlet via the AC power adaptor.
5
4
1
2
3