Samsung SC-MX10A-XAP - Manual (Page 45)

English _33
INSERTING / EJECTING THE MEMORY CARD
Inserting a memory card
1. Turn the memory camcorder off.
2. Slide the memory card slot cover to the right to open the cover.
3. Insert the memory card into the memory card slot until it softly clicks
in the direction of the arrow shown in the fi gure.
4. Close the cover.
Ejecting a memory card
1. Turn the memory camcorder off.
2. Slide the memory card slot cover to the right to open the cover.
3. Slightly push the memory card inwards to pop it out.
4. Pull the memory card out of the memory card slot and close the cover.
If you insert a memory card when the memory camcorder is on, the pop-up message will prompt you
automatically to select the storage type.
If there is no memory card inserted, only the built-in memory will be available.
•
•
label pasting portion
Using the built-in memory (SC-MX10A/MX10AU only)
This memory camcorder has an embedded 4GB memory which can be recorded on.
Using a memory card (not supplied)
This memory camcorder has multi card slot for access to SDHC (Secure Digital High Capacity) and MMCplus.
- Some cards are not compatible depending on the memory card manufacturer and memory card type.
•
•