Samsung SC-MX10A-XAP - Manual (Page 80)

68_English
setting options
Version
You can see the firmware version information.
Language
You can select a desired language to display the menu and messages. ➥page 30
The default setting is mass storage.
Before connecting the USB cable, check if the appropriate USB mode you want to use is selected.
•
•
USB Connect
Connect the memory camcorder to a PC via a USB 2.0 cable and you can transfer your movie images from the
storage media, or use this camcorder as a web camera.
settings contents
on-screen
display
"Mass Storage" Transfers the data files with your memory camcorder and a PC. ➥page 75 None
"PC Cam" Uses your memory camcorder as a web camera. ➥page 76 None
Demo
Demonstration automatically shows you the major features that are included with your memory camcorder so that you
may use them more easily.
settings contents
on-screen
display
"Off" Disables the function None
"On"
Activates demonstration mode and shows various features on the LCD screen.
- After it exit to the menu, the demonstration is automatically operated.
- Demonstration mode will resume if you operate any other function in STBY mode for about
6minute.
None
"Auto Power Off " function does not operate during the demonstration mode.
Default Set
You can initialize the memory camcorder settings to the factory defaults (initial settings at the factory).
Initializing the memory camcorder settings to factory defaults does not affect recorded images.
After resetting the memory camcorder, set "Date/Time Set". ➥ page 31