For more information, refer to “change phone – Samsung SGH-A867ZKAATT User Manual

Page 67

Changing Your Settings 64

• Touch

to store your new selections.

Enter a new password (during the first use) using the

onscreen keypad into the New Password field and touch

Enter the new password again and touch

Note: To change this password, see “Change Phone Password” on page 64.

Fixed Dialing Mode

FDN (Fixed Dial Number) mode, if supported by your SIM card,
restricts your outgoing calls to a limited set of phone numbers.
When this feature is enabled, you can make calls only to phone
numbers stored in the FDN list on the SIM card. For more
information, refer to “FDN Mode” on page 93.

Touch On or Off from the Fixed Dialing Mode field.

• On: you can only call phone numbers stored in the Address Book.

You must enter your PIN2 to continue this configuration. You can
obtain your PIN2 from AT&T’s customer service department.

• Off: you can call any number.

Use the onscreen keypad to enter your PIN2 Code and

touch .

Note: The PIN2 code is provided by AT&T. Entering an incorrect PIN2 code

can cause the phone to lock, at which point, you will have to call AT&T
customer service for assistance.

Change Phone Password

The Change password feature allows you to change your current
phone password to a new one. You must enter the current
password before you can specify a new one.

Touch the Change Phone Password field.

Enter the current phone password and touch

Note: Initially, the phone will not have a password assigned, and step 2 will

not be necessary. Once a password is assigned, all steps are
necessary.

Enter the new password and touch

Re-enter the same password and touch

Note: If you change your password, be sure to write it down and keep it in a

safe place. If you forget your password, your phone will require AT&T
customer service to have it unlocked.

Save

Confirm

a867 Eternity.book Page 64 Tuesday, October 14, 2008 10:42 AM