Alarms – Samsung SGH-A867ZKAATT User Manual
Page 148
145
Recorded Audio Folder
This folder shows a list of audio clips that have been recorded
and saved. To access this folder, use the following steps:
1.
Touch
➔
My Stuff
➔
Audio
➔
Recorded Audio.
2.
Touch a pre-recorded memo from the list to begin
playback.
3.
To exit, press
or press
.
Alarms
This feature allows you to both set the alarm to ring at a specific
time.
1.
Touch
➔
Tools
➔
Alarms
➔
Tap to Create. The
following options display:
• Alarm Name: allows you to use a specific name for the alarm. The
name will appear on the display when the alarm activates.
• Alarm Time: use either the Up/Down input arrows or scroll through
the available fields to set the new time for the event, at which time
an alarm will sound. Touch Set to save the new values.
Note: To change the time format, see “Time & Date” on page 60.
• Alarm Repeat: use this option to set the repeating status for the
alarm by placing a checkmark alongside those days you would like
to use for the current alarm. Everyday places a checkmark
alongside all days.
• Set Details: allows you modify some additional features:
–
Alarm Type sets the way in which the alarm sounds when activated
(Melody, Increasing Melody, Vibration, Vibration then Melody, Vibration &
Melody, and Vibe & Increasing Melody).
–
Alarm Tone sets the sound file which is played when the alarm is
activated.
–
Alarm Volume adjusts the alarm’s volume (1 - 7).
2.
Touch Save to store the alarm details and Save again store
this new event.
3.
Touch On from the Auto Power-up field to keep the alarm
event active even if the phone is turned off. Activating this
feature turns the phone on and sounds the alarm even if
the phone was previously is a powered-off state.
Note: To stop the alarm when it rings, locate the Stop slider on the screen
and slide it across to the right until the alarms stops, or you can also
press any key, such as: volume,
,
, etc..
a867 Eternity.book Page 145 Tuesday, October 14, 2008 10:42 AM