Samsung SCH-R550ZKACRI - Manual (Page 41)

Understanding Your Contacts 38
• Lock / Unlock — Prevents/allows deletion of the selected
number.
• Erase All — Deletes all numbers from the selected Calls log.
• View Timer — Shows the call times for the Last Call, Home
Outgoing, Home Incoming, Roaming Calls, All Calls, Last Reset,
and Lifetime Calls timers for the selected Calls log.
4. Select Save. The following options appear in the display:
• Create New — Lets you create a new Contacts entry.
• Update Existing — Lets you add the number or e-mail address
you just entered to an existing Contacts entry.
For more information on saving the number, see “Saving a
Number from a Call” on page 36.
Finding a Contacts Entry
Voice Method
Use the VoiceSignal Contacts command to view contact
information for any named contact stored in your Contacts list by
saying the name.
Note: The Contacts command shows the requested contact information in
the display but does not dial any phone numbers for the contact.
To look up information for a specific contact:
1. In standby mode, press and hold to launch
VoiceSignal.
“Say a Command” appears in the display and is
pronounced through the speaker.
2. Say “Lookup”.
VoiceSignal prompts you to “Say the name.”
3. Speak clearly and say the full name of the person you want
to call, exactly as it is entered in your contact list.
• If VoiceSignal recognizes the name you said, the contact
information for that name appears in the display.
• If VoiceSignal does not recognize the name you said, a choice list of
up to three names appears in the display, and VoiceSignal prompts
you with “Did you say?” followed by the first name on the list.
4. Say “Yes” to confirm the name or “No” to hear the next
name, or use the keypad to select the correct name from
the list. (For more information, refer to “Choice Lists” on
page 101.)
• To say the name again, press Repeat ( ).
• To exit VoiceSignal without dialing, press or .
5. The contact information for the name you selected appears
in the display.