Samsung SC-D5000-XAC - Manual (Page 64)

ENGLISH
Using the CAMCORDER - Advanced Recording
64 64
● WIND CUT
✤ The WIND CUT function works in CAMCORDER, and PLAY
modes.
✤ The WIND CUT function minimizes wind noise or other noise
while recording.
-
When the wind cut is on, some low sounds are eliminated
along with the sound of the wind.
1. Set the device to CAMCORDER and set the
power switch to REC mode.
2. Press the MENU button.
■ The menu list will appear.
3. Turn the MENU DIAL to highlight CAMCORDER
and press the MENU DIAL.
4. Select RECORD SET from the sub-menu and
press the MENU DIAL.
5. Turn the MENU DIAL to highlight WIND CUT and
press the MENU DIAL.
6. This feature toggles ON/OFF each time you press
the MENU DIAL.
7. To exit, press the MENU button.
Notes
■ Make sure WIND CUT is set to OFF when you
want the microphone to be as sensitive as
possible.
■ Use the WIND CUT when recording in windy places such as the
beach or near buildings.
●
✤
✤
■
■
■
CAMCORDER REC MODE
CAMCORDER SET
RECORD SET
DSE SELECT
AUDIO MODE
WIND CUT
AV IN/OUT
12bit
OUT
CAMCORDER REC MODE
CAMCORDER SET
RECORD SET
PLAY SET
CAMCORDER REC MODE
INITIAL
RECORD SET
PLAY SET CAMCORDER
CAMERA
MEMORY
VIEWER