Samsung SC-D5000-XAC - Manual (Page 117)

ENGLISH
USB Interface
117 117
✤ Do not connect the camcorder to PC before installing the program.
✤ If another camera or scanner is connected, please disconnect it in
advance.
✤ This explanation is based on Windows ® 98SE OS.
Program installation
1. Insert the software CD into CD-ROM drive.
- Installation selection screen appears in the monitor.
2. If the installation selection screen does not
appear after inserting the CD
click “Run” on the Windows “Start” menu and exe-
cute SETUP.EXE file to begin installation.
-
When CD-ROM drive is set to “D:drive”, type
“D:\setup.exe” and press Enter.
3. Click one of the icons listed below to install the select-
ed software.
■ The program automatically checks and installs the
driver.
■ DVC Driver: USB removable Disk Driver (Windows ®
98SE only) USB PC CAMERA Driver
■ Editing Software
Using the “removable Disk” function
✤ You can easily transfer data from a memory stick to a PC without
additional add-on cards via a USB connection.
1. Set the device to CAMERA and set the Power Switch to REC mode or
MEMORY PLAY mode.
2. Connect one end of the USB cable to the USB jack on the camcorder
and the other end to the USB connector on your computer.
Using the “PC camera” function
✤ You can use this camcorder as a PC CAMERA.
✤ When you connect to a Web site that can provide video chatting
functions, you can use your camcorder for such functions.
✤ Using the camcorder with PC installed Net-meeting program, you
can conduct video conference.
✤ The PC CAMERA's screen size is 160x120 pixels.
✤ If PC is connected with the USB to the camcorder, the buttons
which excepts the POWER SWITCH, MODE SWITCH, ZOOM
SWITCH and NITE PIX SWITCH are not operated.
1. Set the device to CAMCORDER and set the power switch to REC mode.
2. Connect one end of the USB cable to the USB jack on the camcorder
and the other end to the USB connector on your computer.
Installing DVC Media 5.0 Program
✤
✤
✤
®
■
®
■
✤
✤
✤
✤
✤
✤
3.