Samsung SC-D5000-XAC - Manual (Page 43)

ENGLISH
Functions
43 43
● DEMONSTRATION
✤ Demonstration automatically shows you the major functions
that are included with your camcorder so that you may use
them more easily.
✤ The DEMONSTRATION function may only be used in the
CAMCORDER mode without a tape inserted in the camcorder.
✤ The demonstration operates repeatedly until the
DEMONSTRATION mode is switched OFF.
1. Set the device to CAMCORDER and set the
power switch to REC mode.
2. Press the MENU button.
■ The menu list will appear.
3. Turn the MENU DIAL to highlight INITIAL.
4. Select DEMONSTRATION from the submenu and
press the MENU DIAL.
5. To activate the DEMONSTRATION,
set DEMONSTRATION to ON.
■ Press the menu button to quit the menu.
■ The demonstration will begin.
6. To end the DEMONSTRATION, set the
DEMONSTRATION to OFF.
Notes
■ The DEMONSTRATION function only works when there is no
TAPE installed.
■ The DEMONSTRATION mode is automatically activated when the
camcorder is left idle for more than 10 minutes after switching to
CAMCORDER mode (when no tape is inserted in the camcorder).
■ If you press other buttons (FADE, BLC, PHOTO, EASY) during the
DEMONSTRATION mode, the DEMONSTRATION stops temporar-
ily and resumes 10 minutes later if you do not operate any other
functions.
●
✤
✤
✤
■
■
■
■
■
■
CAMCORDER REC MODE
INITIAL CLOCK SET
WL. REMOTE
REC LAMP
BEEP SOUND
SHUT. SOUND
DEMO CAMCORDER
CAMERA
MEMORY
VIEWER
CAMCORDER REC MODE
INITIAL SET
CLOCK SET
WL.REMOTE
RECORD LAMP
BEEP SOUND
SHUTTER SOUND
DEMONSTRATION SET TIME!