Samsung SCH-R270ZKAMTR - Manual (Page 34)

30
Dialing a Contact Name
1. In Standby mode, press and hold until “Say a
command” appears in the display and plays through
the earpiece.
2. Say “Call” followed by the Contact’s first and last
names. Voice Dial repeats the name and dials the
number.
Note: If Voice Dial is unsure which name you said, it displays a
choice list of up to three names and prompts you with
“Did you say?” followed by the first name on the list. Say
“Yes” to confirm the name, “No” to hear the next name,
or use the keypad to select the correct name from the
list.
3. If the recognized name has multiple numbers stored
for it, Voice Dial displays the possible choices and
prompts you with “Which number?” Say “Home”,
“Work”, or “Mobile”, and Voice Dial dials the specified
number.
4. Press to exit VoiceSignal without dialing.
Dialing a Number
1. In Standby mode, press and hold until “Say a
command” appears in the display and plays through
the earpiece.
2. Say “Call” followed by the telephone number of the
person you want to call. Voice Dial repeats the number
and dials it.
Example: Say “7 8 1 5 5 5 7 2 0 0."
Note: If Voice Dial is unsure of the number, it displays a choice
list of up to three numbers and prompts you with “Did
you say?” followed by the first number on the list. Say
“Yes” to confirm the number, “No” to hear the next
number, or use the keypad to select the correct number
from the list.
3. Press to exit VoiceSignal without dialing.