Text-to-speech – Samsung SCH-M828CAATFN User Manual
Page 98
94
Text-to-Speech
Allows the phone to provide a verbal readout of onscreen data
such as messages and incoming caller information (based on
Caller ID).
Voice Recognizer Settings
1.
Press
➔
and tap
➔
Voice input & output.
2.
Tap Voice recognizer settings.
3.
Configure the available options to alter the settings
associated with this feature.
• Language sets the language to use for voice input and output.
• SafeSearch filters explicit images. Selections are: Off, Moderate,
or Strict.
• Block offensive words hides recognized offensive words.
• Show hints displays hints (as you type) on the drop-
down box.
Text-to-Speech Settings
1.
Press
➔
and tap
➔
Voice input & output
➔
Text-to-Speech settings.
2.
Configure the available options to alter the settings
associated with this feature.
• Listen to an example plays a short example of what the text-to-
speech feature will sound like on your device when activated.
Important!: Before initial use, activate the Install voice data function to
properly activate and use the text-to-speech feature.
• Always use my settings overrides any conflicting application
settings with those you set up within this text-to-speech settings
screen. If enabled, and available as a feature, your device defaults
to using the text-to-speech feature.
• Default Engine sets the speech synthesis engine to use for
spoken text.
• Speech rate adjusts the rate at which onscreen text is spoken by
the device. Choose from: Very slow, Slow, Normal, Fast, and Very
fast.
• Install voice data confirms the installation of necessary data
required for voice synthesis. Tap this to download and install the
free app from Android market.
• Language assigns the language used by the verbal readout.
Choose from English (US) or Spanish (Spain).
• Pico TTS modifies settings for the Pico TTS default engine.
3.
Press
to return to the previous screen.
SCH-M828UM.book Page 94 Thursday, September 1, 2011 3:43 PM