Samsung SCH-M828CAATFN - Manual (Page 54)

50
Activating the Device Name
1. Activate Bluetooth.
2. From the Home screen, press and tap ➔
Wireless & networks ➔ Bluetooth settings ➔ Device name.
3. Press to erase the current device name and enter a
new device name.
4. Tap OK to confirm the setting.
Discoverable Mode
1. From the Home screen, press and tap ➔
Wireless & networks ➔ Bluetooth settings.
2. Tap Discoverable.
The phone activates for discovery for 120 seconds to allow
you to pair with another device. After 120 seconds the
phone reverts to undiscoverable.
Scanning for Devices
1. From the Home screen, press and tap ➔
Wireless & networks ➔ Bluetooth settings.
2. Tap Scan for devices.
The phone scans and lists any discovered devices.
Note: Some Bluetooth devices are secure and require a PIN number to
confirm and pair.
3. Enter a PIN to pair with the device and touch OK.
USB Connection Settings
This menu allows you to select the communcation method for the
USB port on the phone.
Note: You must disable the Bluetooth feature, and/or USB debugging feature
before initiating a USB connection with the phone.
1. From the Home screen, press and tap ➔
Wireless & networks ➔ USB connection.
2. Select one of these USB connection options:
• Charging: use this mode when you are charing the device.
• Mass storage: uses the storage capacity of the phone to store
and upload files. This option allows your computer to detect the
phone as a removable storage drive.
• Ask on connection: asks for a connection type when you connect
to a computer.
SCH-M828UM.book Page 50 Thursday, September 1, 2011 3:43 PM