Samsung SCH-A570NBUXAR - Manual (Page 121)

Section 8: Changing Your Settings 121
Voice Settings
Sect
ion 8
3. Wait for the beep and say the digits using your normal
tone of voice. After a moment, the phone plays back the
recording and prompts “Did the recording sound ok?”
ⅷ
If the recording was good, say “Yes.”
ⅷ If you need to re-record, say “No.”
If you say “No,” the phone prompts you to pronounce
the digits again. Wait for the beep and then say the
digits.
Repeat this step until you’re satisfied with the recording.
4. After confirming that the recording sounds “ok”,
continue the recording process with the next set of
digits.
5. After six sets of digits, the phone asks whether you want
to do more adaptation. Answer “Yes.”
6. Repeat steps 4 and 5 for another six sets of digits. After
the second group of six sets of digits, “Adaptation
complete” plays through the speaker and you are
returned to the Setup Digit menu.
Reset Digits
To reset digit dialing to factory default settings, do the
following:
1. In standby mode, press the key, then press (for
Voice), (for Voice Setting), and for Digit
Dialing. The following options appear in the display:
ⅷ
Adapt Digits
ⅷ
Reset Digits
2. Use the navigation keys to highlight Reset Digits, then
press . The phone prompts you to confirm digit rest.