Wireless, Trouble-shooting, Merlin – Maximum Wireless Mystic User Manual
Page 11: Mystic
TROUBLE-SHOOTING
WIRELESS
30 Barnet Boulevard
New Bedford, MA 02745
(508) 995-2200
Page 11
NO SERIAL DATA
(Instrument has never recognized a receiver)
THE FOLLOWING ILLUSTRATIONS SHOW HOW THE INSTRUMENT
DIAL WILL INDICATE IMPROPER OPERATION
.
MERLIN
SYMPTOM:
REMEDY:
-Center (Numeric) LED’s display “- - - -”.
-Mystic Temperature and Pressure LED’s are illuminated.
-Merlin Primary Wind Direction LED’s are illuminated.
-Check all wire connections (Refer to installation diagrams)
-Re-boot the system by unplugging the power supply,
wait 30 seconds, plug it back in.
-The light on the receiver will flash RED and then
GREEN five times, indicating that the receiver is
now powered-up.
-If the instrument continues to display the error code,
call Maximum for further assistance.
RED
GREEN
Note: Depending on the origin of the problem, error
codes may not display on all instruments.
N
E
S
W
N
W
N
E
SE
W
S
MERLIN
PRESENT
PEAK
AVERAGE
FORECAST
MYSTIC
PRESENT
HIGH
LOW
RATE OF CHANGE
WIND CHILL
TEMPERATURE
PRESSURE
MYSTIC