Campbell Scientific VisualWeather Software User Manual
Page 48
VisualWeather
™
Software
• If FTP Enabled is checked, all files that are being output to the Local
Output Folder will also be sent to the Remote Folder using the specified
FTP settings. These files include station data images, WebData.xml, and
batch reports.
In order to set up the web page, the user will initially need to
copy default.htm and the
directory to the FTP location. These will not be copied
automatically.
NOTE
Host Address
The FTP server to which the files will be sent.
User ID
The username on the FTP server.
Password
The user’s password on the FTP server
SFTP (SSH FTP)
Select the check box to enable SFTP (SSH File Transfer Protocol).
Clear the check box to disable SFTP.
Four server types are supported. Three of these are supported by
default: FTP (File Transfer Protocol), FTPS (FTP over implicit
TLS/SSL), and FTPES (FTP over explicit TLS/SSL). The fourth
type, SFTP, is only enabled if this check box is selected.
Remote Folder
Selects the folder on the FTP server to which the files will be
transferred. The files will be saved to this folder under the FTP
server’s FTP root directory. Press the button to browse to the desired
directory.
38