Campbell Scientific VisualWeather Software - Manual (Page 19)

VisualWeather
™
Software
6.3 Monitoring Station Status
When you have a connection established with a weather station, you can view
the station’s status. This can be done by clicking the Station Status button.
The Station Status window has three tabs. The Summary tab provides an
overview of important status information in the datalogger, including the
information about the datalogger model and its firmware, program details,
battery voltage levels, and card memory (if one is present). Right click within
this window to display a menu for printing the summary or saving this
information in a file.
Only the Summary tab is available for array-based dataloggers. NOTE
The Table Fill Times tab lists the tables in the datalogger, along with the
maximum number of records the table can hold, the estimated amount of time
that it will take the table to fill, and the estimated date and time that the table
will fill based on the time the datalogger program was downloaded and the
9