Campbell Scientific LoggerLink Mobile App for iOS - Manual (Page 8)

Datalogger Setup—Settings
TCP Settings
Address
The TCP/IP Address of the device you will be
communicating with.
Port
The TCP/IP Port the device is accepting connections on.
This defaults to 6785.
Datalogger Settings
Type
The Type of the datalogger you will be communicating
with.
Name
The Name used to identify this datalogger in LoggerLink.
Data files collected from this datalogger will be stored in a
sub-directory with this name.
PakBus Settings
Address
The PakBus Address of the datalogger you will be
connecting to. The valid range is 1 through 4094.
However, PakBus addresses greater than 3999 are typically
reserved for PakBus routing devices and ports.
TOC 6