Campbell Scientific LoggerLink Mobile App for iOS - Manual (Page 28)

options to save the edited file to your iOS device (Save Local)
or save the edited file to your datalogger. The Save to
Datalogger option gives you the ability to edit a program on
your datalogger. Note that if you edit the running program
and save it to your datalogger, it will cause the program to be
recompiled.
Other functions are available from the file list by tapping the
action button in the upper right corner. If no files are selected,
you have the option to format the drive, refresh all files on the
datalogger, or send files to the datalogger from your device. If
you have selected files, you can delete the selected files from
the datalogger, refresh all files from the datalogger, or get the
selected files from the datalogger and save them to your
device. If only a single program file is selected, file run
options will also be available.
Format Drive
Formatting an individual drive on the datalogger will
permanently delete all the files on that drive. If the
currently running program is found on the drive being
formatted, you will not be able to format the drive until the
Run Options on the running program are cleared.
Refresh
Refreshes the list of all drives and files from the datalogger.
TOC 26