Introduction, Requirements – Campbell Scientific LoggerLink Mobile App for iOS User Manual
Page 3
Introduction
End User License Agreement (EULA)
LoggerLink for iOS is a simple yet powerful tool that lets you
communicate directly with your IP-enabled CR3000, CR1000,
CR800-Series, and CR200-Series dataloggers from your iOS
device. The app lets you perform field maintenance tasks such
as viewing and collecting data, setting the clock, and
downloading programs.
Note: AT&T’s default security settings do not allow mobile-to-
mobile connections on the AT&T network. This affects
connections from a mobile phone or tablet on the AT&T
network attempting to connect to a cellular modem on the
AT&T network. If your mobile device and cellular modem are
both on the AT&T network, please contact Campbell Scientific
for configuration information before purchasing LoggerLink.
This does not affect connections where the phone and/or the
modem are on another network (for instance, a Verizon phone
connecting to an AT&T cellular modem or vice versa, or a
Verizon phone to Verizon cellular modem connection).
Requirements
LoggerLink for iOS runs on iOS 5.0 or greater.
1