Campbell Scientific LoggerLink Mobile App for iOS - Manual (Page 32)

Cancel Changes
If unapplied changes have been made to any settings, the
Cancel Changes option will be available. Cancel Changes
will discard any pending changes and revert the settings to
their original values.
Disconnect
When you are finished interacting with your datalogger, simply
tap on the Disconnect tab to disconnect. Disconnecting from a
datalogger will end all communications with that datalogger and
take you back to your list of dataloggers.
Off-line Files
Pressing the folder button at the top of the main LoggerLink
screen (i.e., when you are not connected to a datalogger) will
display the files on your device that are associated with
LoggerLink. Each device with associated files will have its
own folder. Tapping a folder name will display the files
associated with that device. This includes data files, log files,
and files retrieved from the device. In addition to the device
folders, there is a tabledefs folder which holds the table
definition files for each device. Under the folders,
LoggerLink files not associated with a specific device are
shown.
A single datalogger's files are also accessible by tapping the
folder icon at the top of the datalogger's information page (i.e.,
TOC 30