Campbell Scientific LoggerLink Mobile App for iOS - Manual (Page 18)

Low 12V Count
The number of occurrences of the 12VLow signal being
asserted. When this condition is detected, the datalogger
ceases measurements and goes into a low power mode until
proper system voltage is restored.
Low 5V Count
The number of occurrences of the 5VExtLow signal being
asserted.
Skipped Scans
The number of skipped scans that have occurred while
running the current program. Does not include scans
intentionally skipped as may occur with the use of ExitScan
and Do...Loop instructions.
Skipped System Scans
The number of scans skipped in the background calibration.
Skipped Slow Scans
The number of scans skipped in a SlowSequence.
Variable Out of Bounds
The number of times an array was accessed out of bounds.
Battery Info
Battery
The current value of the battery voltage. This measurement
is made in the background calibration.
Lithium
The current voltage of the lithium battery. This
measurement is updated in background calibration.
TOC 16