Campbell Scientific LoggerLink Mobile App for iOS - Manual (Page 7)

Connected
After you have connected to your datalogger, a set of tabs will
appear at the bottom of the screen. Tapping on these tabs will
allow you to perform different operations on your datalogger
such as viewing data in a tabular or graphical format, monitoring
status, and collecting data.
Note that on an iPhone, you will need to tap the More button to
see some of the available operations. With the More screen
open, you can tap the Edit button to configure your tab bar.
Drag your most used items to the tab bar to make them visible
without pressing More.
If you leave LoggerLink or your device goes to sleep while
connected to a datalogger, you will be automatically
disconnected from the datalogger 10 minutes after any
background processes (such as data collection) complete. Note
that if you have Prevent Auto-Lock enabled (see the
LoggerLink Settings section), your device will not
automatically go to sleep while you are connected to a
datalogger. You must put the device to sleep manually or
disconnect from the datalogger.
Disconnecting
When you are finished interacting with your datalogger, simply
tap the Disconnect tab to disconnect and return to the list of
dataloggers.
TOC 5