beautypg.com

3 step 3: devconfig communications, Step 3: devconfig communications, 2. connected in devconfig – Campbell Scientific 9522B Iridium Satellite Modem and COM9522B Interface Modem User Manual

Page 15

background image

9522B Iridium Satellite Modem and COM9522B Interface Modem

3.2.3 Step 3: DevConfig Communications

Once you have clicked Connect, you should be connected to the modem

(FIGURE 3-2).

FIGURE 3-2. Connected in DevConfig

Type the following command string that correlates to the datalogger and/or

Baud rate being used:

CR1000:

AT&F0 S0=1 &D0 +IPR=6,0 V0 &K0 &W0 &Y0

CR10X:

AT&F0 S0=1 &D0 +IPR=5,0 V0 &K0 &W0 &Y0

The appropriate command string will need to be used in both modems.

Press “Enter” once the string has been input. See FIGURE 3-3 and FIGURE

3-4 for an example.

7