Flytec 4030 * - Manual (Page 30)

Flytec
Operating Instructions FLYTEC 4030 29
These two emulations are offered by the majority of standard dot impact printers.
The width of the printout (either condensed mode or normal mode) can be selected at the third
level:
--I I--
Ł condensed mode (double width)
-I I-
Ł normal mode
At the fourth level, you can enter your name; the name entered appears on the logbook printout.
The individual letters of the name must be entered individually as ASCII code (
Ł ASCII table in
the appendix). The letter displayed is confirmed with the key and the next displayed. The
name may be 21 characters long. The number of the character appears in the digital vario dis-
play and the ASCII code for the character is shown in the MEMO display. Press the
key to enter the next character. Press the key to return to the third level of option mode.
Press both option keys to return to run mode.
APPENDIX
Scope of supply
The following items are included:
• FLYTEC 4030 instrument
• Leg clip
• Protective sleeve
• Manual
• PC software and PC cable
The following are available as accessories:
• Various attachment fixtures
• Various speed sensors
• Printer cable (serial or parallel)
TIME
SPEED
MEMO
ALT 1
ALT 2
CHRONO
ALT 1
ALT 2
CHRONO