Flytec 4030 * - Manual (Page 26)

Flytec
Vario and Vario integrator:
Is displayed in accordance with the VARIO OPTION mode.
Actual glide ratio:
Current glide ratio of the craft (computed with ground speed).
Final approach computer: instrument settings
GPS function on/off: Set the GPS function to on (q.v. ALT 2 OPTION MODE).
Polars: Activate craft-specific polar (q.v. SINK OPTION MODE).
Target altitude: Target altitude input for final approach calculation (q.v. ALT 2 SET MODE).
Final approach computer on/off: Activates or deactivates the final approach computer
(q.v. Vario Set mode).
Wind component: Corresponds to the wind component that the pilot expects in his final
approach and is for the precise calculation of the time for the final approach.
During phase 1, the wind component is calculated from the flight instrument and
GPS data (q.v. SPEED SET MODE).
Operating Instructions FLYTEC 4030 25