Avocent DSRTM 1021 User Manual

Page 42

Chapter 3: Local Port Operation

The Keyboard command enables you to send a different keyboard country

code than the default US setting. The specified country code is sent to all

servers attached to the DSR1021 switches when they are powered up or

rebooted, and the new code is stored in the DSRIQ module.

NOTE: If a DSRIQ module is moved to a different server, the keyboard country code will need to
be reset.

See Appendix F for information on emulating certain Sun keys using a PS/2

keyboard and special considerations for Japanese and Korean Sun

USB keyboards.

NOTE: Only local users can view or change keyboard country code settings.

To set the keyboard country code for Sun servers:

If the OSCAR interface is not open, press Print Screen. The Main dialog
box will appear.

2. Click

Setup - Keyboard. The Keyboard dialog box appears.

Figure 3.12: Keyboard Dialog Box

3. Select a country code and click OK.

4. Reboot the Sun servers. After rebooting, each Sun server will request the

country code setting stored in the DSRIQ module.

NOTE: If you wish to reboot the servers by power-cycling them, you must wait 90 seconds
before rebooting. A soft reboot may be performed without waiting 90 seconds.