Avocent DSRTM 1021 - Manual (Page 31)

28 DSR Installer/User Guide
2. Type a name in the New Name box. Names of servers or serial devices may
be up to 15 characters long. Legal characters include: A-Z, a-z, Ø-9, space
and hyphen.
3. Click OK to transfer the new name to the Names dialog box. Your selection
is not saved until you click OK in the Names dialog box.
4. Repeat steps 1-3 for each server or serial device in the system.
5. Click OK in the Names dialog box to save your changes.
-or-
Click X or press Escape to exit the dialog box without saving changes.
NOTE: If a DSRIQ module has not been assigned a name, the EID is used as the default name.
To list servers alphabetically by name:
Press Alt+N or click Name in the Main dialog box.
Changing the Display Behavior
Use the Menu dialog box to change the display order of servers and set a
Screen Delay Time for the OSCAR interface. The display order setting alters
how servers will display in several screens including the Main and Broadcast
dialog boxes.
To access the Menu dialog box:
1. Press Print Screen to launch the OSCAR interface. The Main dialog
box appears.
2. Click Setup - Menu in the Main dialog box. The Menu dialog box appears
(see Figure 3.5).