MagTek MICRSafe99875466 - Manual (Page 44)

MICRSafe with 3-Track MSR
36
Example Set Convert To String B property Request (Hex):
Cmd Num Data Len Prp ID Prp Value
01 03 1D 0D 0D
Example Set Convert To String B property Response (Hex):
Result Code Data Len Data
00 00
Example Get Convert To String B property Request (Hex):
Cmd Num Data Len Prp ID
00 01 1D
Example Get Convert To String B property Response (Hex):
Result Code Data Len Prp Value
00 02 0D 0D
RESET DEVICE COMMAND
Command number:
2
Description: This command is used to reset the device’s USB CPU. This command can
be used to make previously changed properties take effect without having
to unplug and then plug in the device. When the device resets it
automatically does a USB detach followed by an attach. After the host
sends this command to the device it should close the USB port, wait a few
seconds for the operating system to handle the device detach followed by
the attach and then re-open the USB port before trying to communicate
further with the device.
Data structure: No data is sent with this command
Result codes: 0 (success)
Example Request (Hex):
Cmd Num Data Len Data
02 00
Example Response (Hex):
Result Code Data Len Data
00 00