MagTek MICRSafe99875466 - Manual (Page 42)

MICRSafe with 3-Track MSR
34
CONVERT TO STRING A PROPERTY
Property ID:
27 (0x1B)
Property Type: String
Length: 0 – 7 bytes
Get Property: Yes
Set Property: Yes
Default Value: The default value is no string with a length of zero.
Description: The value is an ASCII string that represents the device’s Convert To String
A property. This string can be 0 – 7 bytes long. This string is sent in place of
the character specified in the Convert From Char A property. See the
Convert From Char A property for more information and examples.
This property is stored in non-volatile memory, so it will persist when the unit
is power cycled. When this property is changed, the unit must be reset (see
Command Number 2) or power cycled for these changes to take effect.
Example Set Convert To String A property Request (Hex):
Cmd Num Data Len Prp ID Prp Value
01 03 1B 0D 0D
Example Set Convert To String A property Response (Hex):
Result Code Data Len Data
00 00
Example Get Convert To String A property Request (Hex):
Cmd Num Data Len Prp ID
00 01 1B
Example Get Convert To String A property Response (Hex):
Result Code Data Len Prp Value
00 02 0D 0D
CONVERT FROM CHAR B PROPERTY
Property ID: 28 (0x1C)
Property Type: Byte
Length: 1 byte
Get Property: Yes
Set Property: Yes
Default Value: 255 (0xFF) (None)
Description: The value is a byte that represents the ASCII value of a character transmitted
by the device as keystroke data that is to be changed into a string of ASCII
values prior to being transmitted by the device as keystroke data. The string
of ASCII values that this value will be changed into is contained in the
Convert To String B property. If the value of this property is set to 0xFF, no
characters will be changed into the string. For example, if you would like a