MagTek MICRSafe99875466 - Manual (Page 16)

MICRSafe with 3-Track MSR
8
The MSR is capable of reading ISO, AAMVA, and CDL encoded cards. The MSR will
autodiscriminate all the card formats when the ID Card Decoding option is enabled using the HW
(Hardware) command (Section 4, Legacy Commands).
LED INDICATORS
Table 3-1 describes the LED indicator conditions for check and card reading operations. The
LED indicator for check reading is located to the left of the slot where the check is first inserted
for reading. The LED indicator for card reading is located on the upper left side of the MSR rail.
Table 3-1. LED indicators
LED INDICATOR DESCRIPTION
OFF Power off
SOLID GREEN Ready to read check or card
OFF
→ SOLID RED Check or card read error
OFF
→ SOLID GREEN Good read
FLASH RED/GREEN Data sensor blocked (motor does not run)*
FLASH RED Motor sensor blocked (motor does not run)*
* Refer to Appendix C. Troubleshooting Guide.