Videotec MAXIMUS WASEX - Manual (Page 7)

Instruc
tions manual - English - EN
5
5.3 Safely disposing of packaging
material
The packaging material can all be recycled. The
installer technician will be responsible for separating
the material for disposal, and in any case for
compliance with the legislation in force where the
device is to be used.
When returning a faulty product we recommend
using the original packaging for shipping.
5.4 Preparatory work before
installation
5.4.1 Drilling the box (optional)
The product has 2 holes with seal rings for passing
through the power cord of the solenoid valve and
the delivery pipe. In order to assemble additional seal
rings, it is possible to create other holes on the base
and left-hand side.
Fig. 6
5.4.2 Assembly of the seal rings
(optional)
During assembly, be careful not to damage
the rubber and thereby reduce its air-
tightness.
Position the sealing ring against the hole. Grip the
sealing ring from the outside using pliers or a similar
tool. Pull it through the hole until the conical part
has come all the way out. The seal ring should adhere
fully to the hole in its final position.
Fig. 7
Limits of the cable port hole and the used cables
diameters.
LIMITATIONS OF USE RELATING TO THE DIAMETER OF
THE HOLE AND OF THE CABLES
Sealing ring Ø Cable port hole
(mm/in)
Cable Ø limits
(mm/in)
M16 16.5 5-9
M20 20.5 8-12
Tab. 1