Dake Model LE10A - Manual (Page 7)

12/10/07 Model LE10A Text 7
2.2 Machine Life
The intended life limit of this machine is ten years under normal operating
conditions and with good maintenance. The intended life of this machine is
calculated by: 8 hours x 5 days x 52 weeks x 10 years = 20,800 hours.
2.3 Intended Use
The LE10A is an automatic hydraulic band saw machine. It is designed and
constructed for metal sawing only. It is not intended to cut other materials for
example: meat, wood, stone, plastic, Mg and analogous materials.
For safety, it is designed with safety guarding to protect from the moving elements
while operating.
The interlock devices of the wheel guards are hardwired to stop the spindle
revolution of the drive and drive wheel.
This machine has three operation modes:
(1) Automatic Mode
(2) Single Cycle Mode
(3) Manual Mode
It is designed for a trained and skilled person to operate this machine; they must be
trained until they know how to operate it safety.
It is designed that this machine can not be used in a potential explosive
environment.
2.4 Noise Level
The LE10A have a noise level below 75dB (For detailed information, please refer to
the TECHNICAL Section)
SECTION 3
3.1 Transportation
Use a forklift to move the
crated machine. When moving
the machine with a forklift, be
sure the load is safely balanced
personal injury or damage to the
machine can result. Below is the
requirements for lifting: